Search
Filters
Close

Highland Park 12 inch Agate Specimen Slab Saw Model 12 - Free Shipping on orders over $50 in the contiguous USA!

12 inch precision specimen slab saw with heavy guage powder-coated steel tank, powerfeed, cross-feed vise and 1/2 HP 110V motor
SKU: Model12
$1,995.00

HIGHLAND PARK STYLE 12 INCH SLAB SAW MODEL 12 WITH POWERFEED AND CROSS-FEED VISE

WORKPIECE SIZE:

5 x 4 inch Cross Section

FEATURES AND SPECIFICATIONS:

-ARBOR SHAFT – Cold rolled steel machined to 3/4 inch bearing diameter. 5/8 inch diameter for diamond saw blade

-BLADE FLANGES – Steel 2-1/4 inch outside diameter

-AUTOMATIC CUT-OFF SWITCH – adjustable for length of cut

-POWERFEED – Approximate workpiece infeed rates 11-1/4 inches per hour, 3/16 inches per minute

-SPLIT NUT DRIVE – Engages carriage with powerfeed screw. Released by a flip of the handle for quick carriage return

-ROLLER BEARING CARRIAGE – Carriage rides on precision roller bearings instead of metal on metal bushings resulting in accurate operation that will never wear out

-WAYS – 1 inch square cold rolled steel structural tubing

-SAW BOX – Welded 16 gauge steel. Inside dimensions 14-1/2 inches wide x 8-1/2 inches deep x 22-1/2 inches long. Overall height with hood closed – 30 inches

-VISE – Steel iron jaws; 4 inches high x 4 inches long
   -Maximum workable jaw opening 4 inches
   -Lateral travel of vise assembly 2 inches

-V-BELTS – Connect motor to saw blade and powerfeed screw

-MOTOR – 110 volt ½ H.P. with thermal protection and start and run capacitors (230 volt 50 Hz available)

-SHIPPING WEIGHT – 200 lbs. CRATE INCLUDED FREE and NO “Handling Charges"

MORE INFORMATION

What to look for in a slab saw

How Highland Park Builds a Slab Saw

Owners Manual

FINALLY, A 12” SLAB SAW WITH NO COMPROMISES

The Highland Park 12 inch slab saw is designed for the discerning craftsman. It is ideal for cutting agate specimens, limb casts, iris, opal and other valuable material where reducing blade kerf and achieving consistent smooth cuts is critical. The Model 12 is not a trim saw with a powerfeed added to it. Designed from the ground up to produce precise smooth cuts with a “real” vertical vise that will hold the material properly and a full metal enclosure, it features the same proven design concepts incorporated in the larger Highland Park style slab saws. Simply put, the Highland Park Model 12 is unmatched in its class

HIGHLAND PARK STYLE 12 INCH SLAB SAW MODEL 12 WITH POWERFEED AND CROSS-FEED VISE

WORKPIECE SIZE:

5 x 4 inch Cross Section

FEATURES AND SPECIFICATIONS:

-ARBOR SHAFT – Cold rolled steel machined to 3/4 inch bearing diameter. 5/8 inch diameter for diamond saw blade

-BLADE FLANGES – Steel 2-1/4 inch outside diameter

-AUTOMATIC CUT-OFF SWITCH – adjustable for length of cut

-POWERFEED – Approximate workpiece infeed rates 11-1/4 inches per hour, 3/16 inches per minute

-SPLIT NUT DRIVE – Engages carriage with powerfeed screw. Released by a flip of the handle for quick carriage return

-ROLLER BEARING CARRIAGE – Carriage rides on precision roller bearings instead of metal on metal bushings resulting in accurate operation that will never wear out

-WAYS – 1 inch square cold rolled steel structural tubing

-SAW BOX – Welded 16 gauge steel. Inside dimensions 14-1/2 inches wide x 8-1/2 inches deep x 22-1/2 inches long. Overall height with hood closed – 30 inches

-VISE – Steel iron jaws; 4 inches high x 4 inches long
   -Maximum workable jaw opening 4 inches
   -Lateral travel of vise assembly 2 inches

-V-BELTS – Connect motor to saw blade and powerfeed screw

-MOTOR – 110 volt ½ H.P. with thermal protection and start and run capacitors (230 volt 50 Hz available)

-SHIPPING WEIGHT – 200 lbs. CRATE INCLUDED FREE and NO “Handling Charges"

MORE INFORMATION

What to look for in a slab saw

How Highland Park Builds a Slab Saw

Owners Manual

FINALLY, A 12” SLAB SAW WITH NO COMPROMISES

The Highland Park 12 inch slab saw is designed for the discerning craftsman. It is ideal for cutting agate specimens, limb casts, iris, opal and other valuable material where reducing blade kerf and achieving consistent smooth cuts is critical. The Model 12 is not a trim saw with a powerfeed added to it. Designed from the ground up to produce precise smooth cuts with a “real” vertical vise that will hold the material properly and a full metal enclosure, it features the same proven design concepts incorporated in the larger Highland Park style slab saws. Simply put, the Highland Park Model 12 is unmatched in its class

Need Assistance?
+1 512-348-8528