Search
Filters
Close

EverClean multi-saw oil cleaning system - FREE SHIPPING!

EverClean freestanding multi-saw oil cleaning system with 1/4 HP 110V motor
SKU: ModelECFS
$1,295.00

HIGHLAND PARK FREESTANDING EVERCLEAN OIL CLEANING SYSTEM

FEATURES AND SPECIFICATIONS:

-CLEANING MECHANISM – Centrifugal filtration system exerts nearly 3000G for real-time oil desludging

-CAPACITY – 1/2 gallon disposable sludge canister

-HOUSING – Durable one-piece powder-coated cast aluminum

-TANK – Welded 13 gallon 7 gauge steel tank with rugged powder coat finish and locking casters

-PUMP – 3 gallons per minute – cycles and cleans the entire oil of the tank approximately every 3 minutes

-MOTOR – 110 volt 1/4 H.P. with thermal protection and start and run capacitors (230 volt 50 Hz available)

-APPROXIMATE SHIPPING WEIGHT – 220 lbs

FREE SHIPPING IN CONTINENTAL USA!

KEEP YOUR SHOP EVERCLEAN™

The Freestanding EverClean system is a revolutionary new product that solves one of the age-old problems of oil contamination in multiple slab saws. Ruggely built on locking casters, the Freestanding EverClean system is low enough to roll under many machines to allow dirty oil to be poured directly into the tank.  With the cost of oil running $15-$20/gallon, it can be very costly to do an oil change on a single saw let alone a batch of saws.

HIGHLAND PARK FREESTANDING EVERCLEAN OIL CLEANING SYSTEM

FEATURES AND SPECIFICATIONS:

-CLEANING MECHANISM – Centrifugal filtration system exerts nearly 3000G for real-time oil desludging

-CAPACITY – 1/2 gallon disposable sludge canister

-HOUSING – Durable one-piece powder-coated cast aluminum

-TANK – Welded 13 gallon 7 gauge steel tank with rugged powder coat finish and locking casters

-PUMP – 3 gallons per minute – cycles and cleans the entire oil of the tank approximately every 3 minutes

-MOTOR – 110 volt 1/4 H.P. with thermal protection and start and run capacitors (230 volt 50 Hz available)

-APPROXIMATE SHIPPING WEIGHT – 220 lbs

FREE SHIPPING IN CONTINENTAL USA!

KEEP YOUR SHOP EVERCLEAN™

The Freestanding EverClean system is a revolutionary new product that solves one of the age-old problems of oil contamination in multiple slab saws. Ruggely built on locking casters, the Freestanding EverClean system is low enough to roll under many machines to allow dirty oil to be poured directly into the tank.  With the cost of oil running $15-$20/gallon, it can be very costly to do an oil change on a single saw let alone a batch of saws.

Need Assistance?
+1 512-348-8528