Search
Filters
Close

Highland Park Style 24 inch slab saw Model 24 Model 24 - Free Shipping on orders over $50 in the contiguous USA!

24 inch slab saw with heavy guage powder-coated steel tank, powerfeed, cross-feed vise and 1.5 HP 110V motor
SKU: Model24
$4,995.00

HIGHLAND PARK 24 INCH SLAB SAW MODEL 24 WITH POWERFEED AND CROSS-FEED VISE

WORKPIECE SIZE:

UP to 9 inch X 17-3/4 inch cross section

FEATURES AND SPECIFICATIONS:

-ARBOR SHAFT – Cold rolled steel machined to 1-3/8 inch diameter. 1 inch diameter for diamond saw arbor

-BLADE FLANGES – Aluminum 5-1/4 inch outside diameter

-AUTOMATIC CUT-OFF SWITCH – adjustable for length of cut

-POWERFEED – 3 speeds. Approximate workpiece infeed rates: 1) 6-3/4 inches per hour, 2) 8 inches perhour, 3) 10 inches per hour

-SPLIT NUT DRIVE – Engages carriage with powerfeed screw. Released by a flip of the handle for quickcarriage return

-ROLLER BEARING CARRIAGE – Carriage rides on precision roller bearings instead of metal on metalbushings resulting in accurate operation that will never wear out

-WAYS – 1-1/2 inch square cold rolled steel structural tubing

-SAW BOX – Welded 7 gauge steel. Inside dimensions 29-7/8 inches wide x 15-1/2 inches deep x 53-7/8 inches long. Overall height with hood closed – 47-1/2 inches. Stainless drain cap and heavy-duty locking casters included

-VISE – Cast iron jaws; 8 inches high x 9-1/2 inches wide x 18 inches long.
 -Maximum workable jaw opening 17-3/4 inches
 -Lateral travel of vise assembly – 7 inches

-V-BELTS – Connect motor to saw blade and powerfeed screw

-MOTOR – 110 Volt 1.5 H.P. with thermal protection and start and run capacitors (230 volt 50 Hz available)

-SHIPPING WEIGHT – 840 lbs. CRATE INCLUDED FREE and NO “Handling Charges"

MORE INFORMATION

What to look for in a slab saw

How Highland Park Builds a Slab Saw

Owners Manual

AN INTERNATIONAL FAVORITE WITH ROCK PRODUCT MANUFACTURERS

Commercial cutters who process larger materials appreciate the extraordinary rugged construction of Highland Park Model 24. Despite its heavy-duty construction, fast and easy operation is provided by the powerfeed, automatic cut-off switch, and split-nut-drive roller bearing-mounted carriage. When your’re spinning a costly 24 inch blade and cutting for money, there’s not much point in settling for anything less than the best – the Model 24.

 

HIGHLAND PARK 24 INCH SLAB SAW MODEL 24 WITH POWERFEED AND CROSS-FEED VISE

WORKPIECE SIZE:

UP to 9 inch X 17-3/4 inch cross section

FEATURES AND SPECIFICATIONS:

-ARBOR SHAFT – Cold rolled steel machined to 1-3/8 inch diameter. 1 inch diameter for diamond saw arbor

-BLADE FLANGES – Aluminum 5-1/4 inch outside diameter

-AUTOMATIC CUT-OFF SWITCH – adjustable for length of cut

-POWERFEED – 3 speeds. Approximate workpiece infeed rates: 1) 6-3/4 inches per hour, 2) 8 inches perhour, 3) 10 inches per hour

-SPLIT NUT DRIVE – Engages carriage with powerfeed screw. Released by a flip of the handle for quickcarriage return

-ROLLER BEARING CARRIAGE – Carriage rides on precision roller bearings instead of metal on metalbushings resulting in accurate operation that will never wear out

-WAYS – 1-1/2 inch square cold rolled steel structural tubing

-SAW BOX – Welded 7 gauge steel. Inside dimensions 29-7/8 inches wide x 15-1/2 inches deep x 53-7/8 inches long. Overall height with hood closed – 47-1/2 inches. Stainless drain cap and heavy-duty locking casters included

-VISE – Cast iron jaws; 8 inches high x 9-1/2 inches wide x 18 inches long.
 -Maximum workable jaw opening 17-3/4 inches
 -Lateral travel of vise assembly – 7 inches

-V-BELTS – Connect motor to saw blade and powerfeed screw

-MOTOR – 110 Volt 1.5 H.P. with thermal protection and start and run capacitors (230 volt 50 Hz available)

-SHIPPING WEIGHT – 840 lbs. CRATE INCLUDED FREE and NO “Handling Charges"

MORE INFORMATION

What to look for in a slab saw

How Highland Park Builds a Slab Saw

Owners Manual

AN INTERNATIONAL FAVORITE WITH ROCK PRODUCT MANUFACTURERS

Commercial cutters who process larger materials appreciate the extraordinary rugged construction of Highland Park Model 24. Despite its heavy-duty construction, fast and easy operation is provided by the powerfeed, automatic cut-off switch, and split-nut-drive roller bearing-mounted carriage. When your’re spinning a costly 24 inch blade and cutting for money, there’s not much point in settling for anything less than the best – the Model 24.

 

Need Assistance?
+1 512-348-8528