EverClean integrated oil cleaning system with 1/4 HP, turbopump, and associated hardware with one year warranty
Everclean Installation Overview
Priming EverClean Pump
Adjusting Everclean Replacement Canisters
HIGHLAND PARK EVERCLEAN OIL CLEANING SYSTEM
FEATURES AND SPECIFICATIONS:
-CLEANING MECHANISM – Centrifugal filtration system exerts nearly 3000G for realtime oil de-sludging
-CAPACITY – 1/2 gallon disposable sludge canister
-HOUSING – Durable one-piece powder-coated cast aluminum
-PUMP – Highland Park industrial pump – cycles and cleans the entire oil of an 18 inch saw every 2 minutes
-TANK PICKUP – Polished aluminum with a magnetic mount
-MOTOR – 110 volts 1/4 H.P. with thermal protection (220/230 volt 50/60 Hz available)
-APPROXIMATE SHIPPING WEIGHT – 65 lbs
FREE SHIPPING IN CONTINENTAL USA!
KEEP YOUR SAW EVERCLEAN™
The EverClean is a revolutionary new product that solves one of the age-old problems of oil contamination in slab saws. With the cost of oil running $15-$20/gallon, it can be very costly to do an oil change on your saw, not to mention that cleaning a saw is an undesirable dirty task. By cleaning the oil as you cut, the oil can be used for many years and reduces the wear on the internal components as well.
The EverClean Oil Cleaning System is made up of 2 main components:
1. The Pump - The industrial-grade pump is mounted with a bulkhead fitting which has an O-ring for making a leak-tight seal. The pump is connected to the pickup with a short section of hose and then delivers the oil at approximately 3 gallons per minute to the EverClean separator.
2. The EverClean Separator - The separator is designed to easily mount to any conventional slab saw with four bolts and an O-ring bulkhead fitting providing simple, leak-free installation. The centrifuge separates dirt particles from the oil and de-sludged oil is then returned back to the saw. Inside the unit, there is a removable canister, which collects and compacts the sludge.